what are you looking for?
This new powerful eddy current flaw detector makes the manual inspection much easier, faster and more accurate. Defect inspection, weld inspection, conductivity measurement and coating thickness measurement are all included in this instrument. The all-in-one design makes the small body with strong function.
This new powerful eddy current tester makes the manual inspection much easier, faster and more accurate. Inspection settings for different applications can be stored in files and simply called up when needed. Real-time multi-frequency eddy current technology makes the inspection efficiently.
Defect inspection, conductivity measurement and coating thickness measurement are all included in this instrument. The all-in-one design makes the small body with strong function.
Specifications |
|
|
Battery |
lithium battery, long working time of 8 hours per charge |
|
Frequency Range |
64 Hz-5 MHz |
|
Phase |
0-359° in 0.1° steps |
|
Gain |
0-90 dB in 0.5 dB steps |
|
Display |
6.4" TFT 640 x 480 |
|
Operating Temperature |
-20°C to 55°C |
|
Instrument Dimensions |
2.4kg; 253mm x 87mm x 175mm |
|
Defect Inspection |
|
|
Frequency |
2 driving frequencies per channel |
|
Channel |
1 channel |
|
Mixing Unit |
1 mixing unit to suppress noise signal at a constant frequency |
|
Gain Ratio (Y/X) |
0.1-10 |
|
Display Mode |
various display mode |
|
High Pass Filter |
0-500 Hz |
|
Low Pass Filter |
10-10000 Hz |
|
Digital Filter |
1-100 |
|
Drive Voltage Level |
1-8 levels |
|
Storage |
4 GB for testing data, parameters and images |
|
Coating Thickness Measurement |
|
|
Measure Accuracy Displayed |
0.01mm |
|
Measure Range & Error |
0-5mm (can be extended to 1-40mm), Measure Error: ±0.05mm |
|
Conductivity Measurement |
|
|
Measure Range & Error |
1-65 %LACS, ±0.5%; 65-110 %LACS, ±1% |
|
Storage |
20 units of parameter, 100 units of screenshot |
|
Measure Accuracy Displayed |
0.01 %LACS |
Advanced Features
• High-precision defect inspection, like crack, scratch, hole, pit and so on
• High-precision conductivity measurement and coating thickness measurement
• Fast digital electronic balance
• Operation tips and help function can be called to display relevant information
• Two XY displays and real-time display
• Parameters can be stored in advance and easily called out for inspection when needed
• Connectors for USB, Internet and Encoder
• Languages available in English and Chinese
Widely Used For
• Crack detection for aircraft components, axles, machine parts, bolts and so on
• Surface inspection for welds with or without coating
• Inspect non-ferrous heat exchanger tubes, boiler tubes and small pipelines
• Sort different heat treatment conditions and different materials
• Composite material inspection for layer gap corrosion
• Thickness change inspection for work piece
• Conductivity measurement and coating thickness measurement
EEC-309 is designed with MIMO and OFDM technology, which greatly improves the testing speed of RFT. It is widely applied for high speed tube inspection, heat exchangers inspection, condensers inspection etc. It also enables to inspect defects and check wall thickness at the same time.
Learn More
EEC-FT wire inspection ECT is designed with 5 independent testing channels which can test 5 lines at the same time. The start and end of each channel can be controlled individually. The optional powerful report system makes the testing data analysis easily. It is widely used for tungsten wire inspection and molybdenum wire inpsection.
Learn More
EEC-22D Eddy Current Sorting System is specially used for material sorting, hardness sorting, heat treatment sorting, and flaw inspection of metal tubes, bars, wires, auto parts, valves and various metal components. The difference of structure, case depth can be well separated too.
Learn More
EEC-23 eddy current tester can be used for the on-line/off-line tube inspection, bar inspection, wire testing and so on. Work with different probes and accessories, this machine can realize different functions. For example, with saturation device, it can be used for the inspection of ferromagnetic materials; with special probes of welding, it can be used to test welding quality on line or by hand.
Learn More
Heat exchanger tube inspecton system with ECT and RFT functions for both ferrous and non-ferrous tubes. Mixing function enables noise signal remove from the support plate, and tube sheet mapping enables to draw the tube layout and to mark the testing result with different colors.
Learn More
EEC-F ECT sorting system is provided for hardness sorting, material sorting, and heat treatment sorting. It can be used for inspection and sorting of metal tubes, bars, wires, auto parts, valves and various metal components. The difference of structure, surface hardness, case depth can be well separated too.
Learn More
This new powerful eddy current flaw detector makes the manual inspection much easier, faster and more accurate. Defect inspection, weld inspection, conductivity measurement and coating thickness measurement are all included in this instrument. The all-in-one design makes the small body with strong function.
Learn More
With 4-channel and 2-frequency design, this eddy current crack detection instrument enables high-sensitivity and high-efficiency manual inspection. Inspection settings for different applications can be stored in files and simply called up when needed.
Learn MoreWants To Get Latest Updates! Sign Up For Free.
