what are you looking for?
EEC-24K intelligent on-line high-speed eddy current detection machine is a new generation of EC equipment, which is specially applied to online and high speed inspection for metal pipes, bars and wires. Combined with digital eddy current technique, microprocessor technique together, its inspecting speed may up to 13m/s, while the performance of the equipment is reliable, stable and sensitive. EEC-24K has high testing sensitivity when detect defections of metal pipes, bars and wires, for example, surface crack, porosity, opening crack etc.
EEC-24K intelligent on-line high-speed eddy current tester is a new generation of EC equipment, which is specially applied to online and high speed inspection for metal pipes, bars and wires. Combined with digital eddy current technique, microprocessor technique together, its inspecting speed may up to 13m/s, while the performance of the equipment is reliable, stable and sensitive. EEC-24K has high testing sensitivity when detect defections of metal pipes, bars and wires, for example, surface crack, porosity, opening crack etc.
With man-machine conversation, large screen signal display, multi-mode alarming technique, advanced digital electronic balancing technique and intelligent dynamic filtering technique, operation of the equipment is much easier. The testing bandwidth range from 64Hz~5MHz makes the equipment can meet testing requirements of various metal material.
EEC-24K can be connected to passing-through coils, which has low requirement to coupling-clearance; also it can be connected with plane-combined probe. The selection of probe is determined by users’ requirements. Equipped with high-precision time-delay marking module, speed measuring apparatus, marking machine and probe device whose direction is adjustable, the testing system can automatically carry out on-line defect detection. Also, the system has output function of synchronized alarm, which is controlled by internal and external clock; and the width of high-precision marking’s sign can be controlled.
Specifications
□ Inspection speed is up to: 13 meter/sec. (780meter/min)
□ Frequency range: 64 Hz~5 MHz
□ Gain: 0~90dB，with a step of 0.5dB
□ Phase rotation: 0~359° with a step of 1 °
□ Gain ratio: （Y/X）：0.1~10
□ Automatically record and display defect’s number and the position
□ Dynamical fixed-length marking control
□ The synchronous alarming output controlled by internal and external clocks
□ Driven intensity of probe is adjustable
□ High-precision function of removing beginning signal and end signal
□ Real-time and time-delay alarming output with high accuracy
□ Quick digital/analog electronic balance
□ Automatically calendar and time displays
□ Automatically measure amplitude and phase of signal
□ Slow-speed replay, expand and analyse the eddy current testing signal
EEC-309 is designed with MIMO and OFDM technology, which greatly improves the testing speed of RFT. It is widely applied for high speed tube inspection, heat exchangers inspection, condensers inspection etc. It also enables to inspect defects and check wall thickness at the same time.
Learn More
EEC-FT wire inspection ECT is designed with 5 independent testing channels which can test 5 lines at the same time. The start and end of each channel can be controlled individually. The optional powerful report system makes the testing data analysis easily. It is widely used for tungsten wire inspection and molybdenum wire inpsection.
Learn More
EEC-22D Eddy Current Sorting System is specially used for material sorting, hardness sorting, heat treatment sorting, and flaw inspection of metal tubes, bars, wires, auto parts, valves and various metal components. The difference of structure, case depth can be well separated too.
Learn More
EEC-23 eddy current tester can be used for the on-line/off-line tube inspection, bar inspection, wire testing and so on. Work with different probes and accessories, this machine can realize different functions. For example, with saturation device, it can be used for the inspection of ferromagnetic materials; with special probes of welding, it can be used to test welding quality on line or by hand.
Learn More
Heat exchanger tube inspecton system with ECT and RFT functions for both ferrous and non-ferrous tubes. Mixing function enables noise signal remove from the support plate, and tube sheet mapping enables to draw the tube layout and to mark the testing result with different colors.
Learn More
EEC-F ECT sorting system is provided for hardness sorting, material sorting, and heat treatment sorting. It can be used for inspection and sorting of metal tubes, bars, wires, auto parts, valves and various metal components. The difference of structure, surface hardness, case depth can be well separated too.
Learn More
This new powerful eddy current flaw detector makes the manual inspection much easier, faster and more accurate. Defect inspection, weld inspection, conductivity measurement and coating thickness measurement are all included in this instrument. The all-in-one design makes the small body with strong function.
Learn More
With 4-channel and 2-frequency design, this eddy current crack detection instrument enables high-sensitivity and high-efficiency manual inspection. Inspection settings for different applications can be stored in files and simply called up when needed.
Learn MoreWants To Get Latest Updates! Sign Up For Free.
